218
Error Message
Error Message
Meanings
Copy Protected.
Can’t Save
To protect the copyright, this music file cannot be saved as SMF format.
Can’t Save
This Song.
You can only play the music data. It cannot be saved on a floppy disk or internal memory.
Write Protected
Disk
The protect tab on the floppy disk is set to the Protect position.
Change it to the Write position and repeat the procedure.
Master Disk
This floppy disk cannot store the format or save any data. Insert a different disk and repeat
the procedure.
Read Only Song.
Can’t Save
A new song cannot be saved onto this floppy disk.
No Disk
No floppy disk is connected to the disk drive. Insert the disk correctly, and repeat the
procedure.
Disk Full
There is not sufficient space left on the floppy disk for the data to be saved. Save the data
onto a different floppy disk or delete music data on the disk.
Unknown Disk
The floppy disk inserted into the disk drive cannot be read.
Please format the floppy disk.
Disk Ejected
The floppy disk was removed from the disk drive while loading or writing was in progress.
Insert the floppy disk and repeat the procedure.
Damaged Disk
This floppy disk is damaged and cannot be used. Insert a different disk and repeat the
procedure.
Can’t Read
This song cannot be read.
Can’t Play
It cannot be read the floppy disk quickly enough. Press the [Reset] button, then press the
[Play/Stop] button to play the song.
Memory Full
The Rhythm data is excessively large, and cannot be loaded.
The performance data is excessively large, and cannot be loaded.
Since the internal memory is full, recording or editing is not possible.
MIDI Buffer Full
The AT-90SL cannot deal with the excessive MIDI data sent from the external MIDI device.
Reduce the amount of MIDI data sent to the AT-90SL.
Communication
Error
A MIDI cable or computer cable has been disconnected. Connect it properly and securely.
Computer I/F
Error
The Computer Switch is set to a wrong position or the computer is set wrongly. Switch off
the AT-90SL then set the Computer Switch to the correct position and set the computer
correctly. After that, switch on the AT-90SL again.
Memory Error
There is something wrong with the system. Repeat the procedure from the beginning.
Expansion Board
Not Found.
An error with the instrument. Please contact Roland Service.
AT-90SL_e.book 218 ページ ２００４年９月８日 水曜日 午後５時４４分
Summary of Contents for Atelier AT-90SL
Page 1: ...04 9 3N 03676678...
Page 263: ...262 MEMO AT 90SL_e book 262...
Page 266: ...04 9 3N 03676678...
