Roland Atelier AT-90SL Owner'S Manual Download

Page: 109 / 266

108

Chapter 3 Using the Registration Buttons

Deleting a Set of Registrations from a

Floppy Disk

Here’s how to delete a Registration set that was saved to a floppy disk.

Insert the floppy disk containing the Registration into the

disk drive.

Touch <Registration> on the Main screen.

The sub-window appears.

fig.03-04_55

Touch <Disk Edit>.

The Registration Disk Edit screen appears.

fig.03-25_55

Button

Meaning

Description

Rename

Modify the name

The Rename screen appears. You can
touch the screen and rename the
selected registration (p. 94).

Change the order
(upward)

The selected registration will be
moved earlier in the order (p. 110).

Down

Change the order
(downward)

The selected registration will be
moved later in the order (p. 110).

Delete

Delete the
Registration

The selected registration will be
deleted.

Min

Max

Min

Max

Min

Max

Min

Max

Harmony Intelligence

AT-90SL_e.book 108 ページ２００４年９月８日　水曜日　午後５時４４分

Summary of Contents for Atelier AT-90SL











































































































































































































































































Search results

Summary of Contents for Atelier AT-90SL

Reviews:

Related manuals for Atelier AT-90SL

Brands by name

Popular brands

Roland Atelier AT-90SL, Owner'S Manual

Search results

Summary of Contents for Atelier AT-90SL

Reviews:

Related manuals for Atelier AT-90SL

Brands by name

Popular brands