Rohde & Schwarz RTM20 Series User Manual Download

Page: 314 / 499

Remote Control

R&S

RTM20xx

299

User Manual 1317.4726.02 ─ 01

PROBe<m>:SETup:MODE

<Mode>

Select the action that is started with the probe button.

Suffix:

<m>

Selects the input channel. The number of channels depends on
the instrument.

Parameters:

<Mode>

RCONtinuous | RSINgle | AUToset | NOACtion

RCONtinuous

Run continuous: The acquisition is running as long as the probe
button is pressed.

RSINgle

Run single: starts one acquisition.

AUTOSET

Starts the autoset procedure.

NOACtion

Nothing is started on pressing the micro button.
*RST:

RCONtinuous

PROBe<m>:SETup:NAME?

Queries the name of the probe.

Suffix:

<m>

Selects the input channel. The number of channels depends on
the instrument.

Return values:

<Name>

string

Usage:

Query only

PROBe<m>:SETup:OFFSwitch

Switches the integrated voltmeter of an R&S

active probe on or off.

The command is only available if an R&S

active probe with R&S

ProbeMeter is used.

Suffix:

<m>

Selects the input channel. The number of channels depends on
the instrument.

Parameters:

ON | OFF
*RST:

OFF

PROBe<m>:SETup:TYPE?

Queries the type of the probe.

Command Reference

Summary of Contents for RTM20 Series




















































































































































































































































































































































































































































































































Search results

Summary of Contents for RTM20 Series

Reviews:

Related manuals for RTM20 Series

Brands by name

Popular brands

Rohde & Schwarz RTM20 Series, User Manual

Search results

Summary of Contents for RTM20 Series

Reviews:

Related manuals for RTM20 Series

Brands by name

Popular brands