Mathematics
R&S
®
RTM20xx
105
User Manual 1317.4726.02 ─ 01
"Minimum"
Minimum (Op1, Op2)
Compares the amplitudes of both operands and displays the minimum
amplitude. The sign of the result is taken from Operand1. Use this
operation in combination with the "Reciprocal" or "Division" operation
to limit the maximal amplitudes of an operand.
Example:
Operand1 is a MATH waveform within the range of +/-10V.
Operand2 is a constant value of 1V. The result is always smaller than
1V or larger than -1V.
"Square"
Op1 * Op1
Squares the operand. If the operand contains negative values that have
been clipped, then the result contains positive clipping.
"Square Root"
Square Root (Op1)
Calculates the square root of the operand. Note that the square root of
a negative number is undefined and the result is clipped.
"Abs. Value"
|Op1|
Calculates the absolute value of the operand. All negative values are
inverted to positive values. The positive values remain unmodified. If
the operand has negative values that have been clipped, the result
contains positive clipping.
"Pos. Wave"
Max (Op1, 0)
Extracts the positive data points from the operand. For all negative val-
ues the result is zero. The positive values remain unmodified.
Reference for Mathematics
