Rohde & Schwarz RTM20 Series, User Manual

Page: 168 / 499

Protocol Analysis
R&S
®
RTM20xx
153 User Manual 1317.4726.02 ─ 01
1,17,Pressure
Label lists are protocol-specific. Their contents are described in the corresponding pro-
tocol chapters:
● ​
chapter 11.3.4, "I
2
C Label List" , on page 172
● ​
chapter 11.5.3, "CAN Label List" , on page 191
● ​
chapter 11.6.4, "LIN Label List" , on page 202
11.1.4.2 Label List Menu
Access: PROTOCOL > "Bus Type" = "I2C | CAN | LIN" > "Label List"
Apply ...........................................................................................................................153
Load ............................................................................................................................153
Show ...........................................................................................................................153
Sort ..............................................................................................................................153
Remove .......................................................................................................................153
Apply
Shows the labels from the label list in the display of decode results instead of the ID or
address.
Load
Opens a menu to select and load a PTT file from an USB flash drive. The PTT file contains
one or more label lists.
The function is only available if an USB flash drive is connected to the instrument.
Alternatively, you can load a label list together with the device settings, if both were saved
with FILE > "Device Settings > Save > Setup & Label".
See also:
​
"Setup & Label" on page 226
Show
Diplays the label list for the selected protocol type. Before, the label list must be loaded
from a PTT file.
Sort
Displays the label list in alphanumerical order or sorted by ID or address.
Remove
Deletes the label list from the instrument.
Basics of Protocol Analysis