R&S OSP
Instrument Functions
Graphical User Interface
Quick Start Guide 1505.3896.62 - 14
111
If the OSP is connected to a LAN network, the IP address is displayed after booting:
The display shown above disappears after some seconds and the start screen is
displayed with basic information on the equipment:
or
The System field returns the string
rsospvvnnnnnn, x.xx
where
vv
is the two-digit
type identifier (e.g.
“03” for R&S OSP130),
nnnnnn
the serial number of the instrument
and
x.xx
is the software version.
The Address field indicates the IP address (see
chapter 2.9
The Mask field shows the subnet mask string.
With MA
C the instrument’s MAC address is shown.
For the Info field (if activated), see
chapter 3.7
To go to the top level menu (Main menu), press any of the keys
MENU
,
RESET
or OK while the start screen is displayed.
5.3.2.1 GUI Information Line on R&S OSP130
With firmware version 2.57 onwards, an additional information line can be set up at the
R&S OSP130. It either displays any custom text or the actual path set. For configuring
the GUI info line, see
chapter 3.7.1
5.3.3 General Navigation Operations
The instruction in this section describe how to access the various menu levels, the
modules of the instrument, and some general pieces of information.
Summary of Contents for OSP-B011
Page 132: ......
