R&S OSP
Instrument Functions
SCPI Read/Write
Quick Start Guide 1505.3896.62 - 14
129
If any paths are defined for the R&S OSP, they are listed under [Path List].
The name of the path is indicated together with the relay setting related to the path.
Close the Notepad to exit the system info utility.
System Info:
The text file containing the System information is stored with the file name
ospSystemInfo.txt in the installation directory of the OSP Panel (default directory:
C:\OSP Panel).
Each time the system info utility is started at the OSP Panel, this file is overwritten with
the actual data.
5.7 SCPI Read/Write
As an additional feature, the OSP Panel allows a direct communication with the
R&S OSP via SCPI commands. This additional feature is foreseen for debug purpose
and requires to be familiar with SCPI commands of the R&S OSP. Refer to the section
on remote control of the operating manual for further information.
For direct communication with the R&S OSP via LAN interface proceed as follows:
53. Start the OSP Panel.
54. Select
>Utility >Read/Write
… in the OSP Panel.
The following dialog will appear:
Summary of Contents for OSP-B011
Page 132: ......
