Getting Started
R&S
®
EVSG1000
41
User Manual 1178.6227.02 ─ 06
1. Select a key on the front panel of the instrument to activate a function directly, or to
display a softkey menu.
2. Select the softkey for the setting or function as required.
If necessary, select the "More softkeys" key to switch to the second softkey menu.
The function is activated, or a new window is displayed to view or change specific
settings.
3. To set the focus on a specific setting in the displayed window, scroll through the
individual settings by turning the rotary knob or pressing the Up and Down arrow
keys on the front panel (see
Chapter 1.6.2.2, "Entering Data"
4. Scroll through the available setting values by turning the rotary knob or pressing
the Up and Down arrow keys on the front panel, or enter a numeric or alphanu-
meric value as described in
Chapter 1.6.2.2, "Entering Data"
Note:
While you turn the rotary knob, the settings are applied immediately. If you
enter a value using the keypad, you must confirm the setting before the settings
are applied.
5. Confirm the new setting and remove the focus by pressing the rotary knob or the
[ENTER] key on the front panel.
1.6.2.2
Entering Data
You enter data in input fields using elements provided by the front panel, e.g. the key-
pad, rotary knob, or navigation keys.
Entering numeric parameters
If a field requires numeric input, the keypad provides only numbers.
1. Enter the parameter value using the keypad, or change the currently used parame-
ter value by turning the rotary knob or pressing the Up or Down arrow keys.
2. After entering the numeric value via keypad, press the corresponding unit key.
The unit is added to the entry.
3. If the parameter does not require a unit, confirm the entered value by pressing the
[ENTER] key or any of the unit keys.
Entering numbers and (special) characters via the keypad
If a field requires alphanumeric input, use the keypad on the front panel of the
R&S
EVSG1000. Every alphanumeric key represents several characters and one num-
ber. The decimal point key (.) represents special characters, and the sign key (-) tog-
gles between capital and small letters. For the assignment refer to
1. Press the key once to enter the first possible value.
All characters available via this key are displayed.
2. To choose another value provided by this key, press the key again, until your
desired value is displayed.
Operating Basics
