Rohde & Schwarz EVSG-B1, User Manual

Page: 168 / 418

Graphic Measurement Modes
R&S
®
EVSG1000
168 User Manual 1178.6227.02 ─ 06
Up to four markers can be active at the same time. Markers 2 to 4 can be either normal
markers or delta markers. A normal marker indicates the absolute signal value at the
defined position in the diagram. A delta marker indicates the value of the marker rela-
tive to marker 1.
Activating/Deactivating a marker .................................................................................168
└ Marker type (Type Mrk <2-4>) ...................................................................... 168
Deactivating all markers ..............................................................................................169
Moving a marker to a peak in the diagram ..................................................................169
Adapting the center frequency to the current marker position .................................... 169
Relative Unit (for AF spectrum only) ........................................................................... 169
Activating/Deactivating a marker
Access
: [Marker] > "Marker<x>"
Access VNC : [i] > "F1"- "F4"
To activate a marker, select the corresponding softkey. An active marker is highlighted.
To select a marker that is already active, for example to move its position (see "Moving
a marker to a peak in the diagram" on page 169), select the softkey again. A selected
(editable) marker is highlighted orange.
To deactivate an active marker, select the marker until the highlighting is no longer dis-
played.
Marker type (Type Mrk <2-4>) ← Activating/Deactivating a marker
Determines the type of marker results.
Using Markers in the Graphical Displays