manualshive.com logo in svg

Rohde & Schwarz EVSG-B1, User Manual

Share
Download
Rohde & Schwarz EVSG-B1 User Manual Download Page 169

Graphic Measurement Modes

R&S

®

EVSG1000

169

User Manual 1178.6227.02 ─ 06

"Normal"

A normal marker indicates the absolute value at the defined position
in the diagram.

"Delta"

A delta marker defines the value of the marker relative to marker 1
(which is always of type "normal").

Deactivating all markers
Access

: [Mkr Fct] > "All Markers Off"

Access VNC

: [j] > "F1"

Deactivates all markers in the diagram.

Moving a marker to a peak in the diagram
Access

: [Marker ->] > "Peak" / "Next Peak"

Access VNC

: [o] > "F1" / "F2"

Sets the currently active and selected marker (indicated in the softkey) to the highest
or next-highest peak detected in the diagram. If no marker is active or selected, this
function has no effect. To select a marker, see 

"Activating/Deactivating a marker"

on page 168.

Adapting the center frequency to the current marker position
Access

: [Marker ->] > "Center = Marker Freq"

Access VNC

: [o] > "F3"

Sets the center frequency of the spectrum to the position of the currently active and
selected marker (indicated in the softkey). The spectrum is updated to the new fre-
quency range. The span is maintained.

If no marker is active or selected, this function has no effect. To select a marker, see

"Activating/Deactivating a marker"

 

on page 168.

Relative Unit (for AF spectrum only)

Determines the unit for relative markers in the AF Spectrum diagram. Percentage and
dB values are available.

Using Markers in the Graphical Displays

Summary of Contents for EVSG-B1



































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands