Getting Started
R&S
®
EVSG1000
42
User Manual 1178.6227.02 ─ 06
3. With every key stroke, the next possible value of this key is displayed. If all possi-
ble values have been displayed, the series starts with the first value again. For
information on the series refer to
.
4. To change from capital to small letters and vice versa, press the sign key (-).
5. When you have chosen the desired value, wait for 2 seconds (to use the same key
again), or start the next entry by pressing another key.
Entering a blank
► Press the "0" key and wait 2 seconds.
Correcting an entry
Chapter 1.5.1.12, "Navigation Keys"
the cursor to the right of the entry you want to delete.
2. Press the [BACK] key.
The entry to the left of the cursor is deleted.
3. Enter your correction.
Completing the entry
► Press the [ENTER] key or the rotary knob.
For numeric values, the default unit is appended to the numeric input.
To enter a value using a different unit, select the corresponding key.
Aborting the entry
► Press the [ESC] key.
The previous entry is restored.
Table 1-6: Keys for alphanumeric parameters
Key name
(upper inscription)
Series of (special) characters and number provided
7
7 µ Ω ° € ¥ $ ¢
8
A B C 8 Ä ÆÅ Ç
9
D E F 9 É
4
G H I 4
5
J K L 5
6
M N O 6 Ň Ö
1
P Q R S 1
2
T U V 2 Ü
Operating Basics
