Windows
Application CTSgo
CTS-K6
1079.2001.01
34
E-3
6.6 DECT Autotest Dialog
The autotest dialog in DECT mode does not considerably differ from the one in GSM mode. Depending
on the operating mode previously used, the operating mode GSM autotest or DECT autotest will be
active with the next program start of CTSgo. For the structure of the autotest dialog refer to the section
GSM Autotest. The DECT autotest comprises the test of the Fixed Part, FP for short, and the test of
the Portable Part , PP for short. The Fixed Part test is started with, since the RFPI can be requested
from the base station in this test. For testing the Portable Part, the RFPI must already be known. The
Radio Fixed Part Identity is the unambiguous identification number of the fixed part. As the CTS plays
the role of the Fixed Part in the Portable Part Test, it must know the RFPI to be able to address the
Portable Part.
Fig.: CTSgo in GSM Module Test Mode