manualshive.com logo in svg

Rohde & Schwarz CTS30, Operating Manual, Page: 152 / 217

Share
Download
Rohde & Schwarz CTS30 Operating Manual Download Page 152

Windows

 Application CTSgo

CTS-K6

1079.2001.01

100

E-3

11  Exchanging Measurement Report Data

CTSgo does not store country-specific information or texts in the measurement report files. If you have
performed measurements with the English version of CTSgo and want to view the test results with the
German  version, window labeling as well as the information on date and time will be adapted to the
desired language.
During the export of measurement results, the number format will be adapted to the country-specific
standard. The transfer of these files may cause problems when the data are imported to spreadsheet
programs, for instance. If data are to be transferred across country borders, it is advisable to send the
measurement report and export the data on the target platform.

Fig.: English and German report display

Summary of Contents for CTS30


























































































































































































































Reviews:

No comments