Windows
Application CTSgo
CTS-K6
1079.2001.01
52
E-3
7.3.11 First Disconnect
Using this command you can determine the procedure for the first call clear-down. Select by a click on
the respective box whether a call release is expected from the mobile or whether the call should be
cleared down by the CTS.
Note:
This command can only be selected if the first connection is activated for the test.
7.3.12 Second Connect
This command permits to select the procedure for the second call clear-down. Select by a click on the
respective box whether the CTSgo program expects a call from the mobile or whether the call should
be set up by the CTS.
Note:
This command can only be selected if the second connection is activated for the test.
7.3.13 Test Set 7
You can determine the measurements to be performed in the selected TCH channel. For details refer
to the description under Test set 1.
Note:
This command can only be selected if test set 7 is activated for the test.
7.3.14 Test Set 8
You can determine the measurements to be performed in the selected TCH channel. For details refer
to the description under Test set 1.
Note:
This command can only be selected if test set 8 is activated for the test.
Fig.: Configure Disconnect dialog window