CTS-K6
Windows
Application CTSgo
1079.2001.01
51
E-3
7.3.6 Test Set 2
You can determine the measurements to be performed in the selected TCH channels. For details refer
to the description under Test set 1.
Note:
This command can only be selected if Test set 2 is activated for the test.
7.3.7 Test Set 3
You can determine the measurements to be performed in the selected TCH channels. For details refer
to the description under Test set 1.
Note:
This command can only be selected if Test set 3 is activated for the test.
7.3.8 Test Set 4
You can determine the measurements to be performed in the selected TCH channels. For details refer
to the description under Test set 1.
Note:
This command can only be selected if Test set 4 is activated for the test.
7.3.9 Test Set 5
You can determine the measurements to be performed in the selected TCH channels. For details refer
to the description under Test set 1.
Note:
This command can only be selected if Test set 5 is activated for the test.
7.3.10 Test Set 6
You can determine the measurements to be performed in the selected TCH channels. For details refer
to the description under Test set 1.
Note:
This command can only be selected if Test set 6 is activated for the test.