Rockwell Automation Allen-Bradley LiquiFlo 2.0, User Manual

Page: 117 / 268

Rockwell Automation Publication D2-3518-4 - January 2020 117
Parameter Descriptions Chapter 9
Figure 46 - Drive Status 2 (210)
Indicates Type 1 alarm conditions that currently exist in the drive. Note that for
alarm conditions not configured in Alarm Config 1 (259), the status indicated is
a zero.
See Chapter 10 for more information about alarms.
Figure 47 - Drive Alarm 1 (211)
Bit 0 - Ready
= No start inhibits are active.
Bit 1 - Active
= Drive is generating output voltage to the motor.
Bit 2 - Running
= Drive is generating output voltage to the motor,
run has been selected.
Bit 8 - AutoRst Ctdn = Auto Restart Countdown. See parameter 174.
Bit 9 - AutoRst Ac = Auto Restart Active. See parameter 174.
Bit 11 - Bus Freq Reg = Drive is regulating bus frequency.
211 Drive Alarm 1
Range: See Figure 47
Default: Read Only
Access: 1 Path: Utility > Diagnostics
Utility > Alarms
See also: 212, 259
0 1 1 0 0 0 0 x 0 1 1 1 0 1 x x
0 0 1 1 2 3 4 5 6 7 8 9 11 12 13 14 15
1 =Condition True
0=Condition False
x =Reserved
Bit #
Ready Activ
e
Running Jogging Stopping DC B
raking
AutoT
uning
AutoRst Ctdn AutoRst Act
Curr Limit Bus F
req Reg
Motor Ov
erld
DPI at 500 k
Nibble 1 Nibble 2 Nibble 3 Nibble 4
0 0 0 0 0 0 x 0 0 0 0 0 0 x x x
0 0 1 1 2 3 4 5 6 7 8 9 11 12 13 14 15
1 =Alarm Active
0=Alarm Inactive
x =Reserved
Bit #
Prechrg Actv UnderV
oltage
Po
wer Loss
Str At PwrUp Anlg in Loss IntDBRes OH Dr
v OL Lvl 1
Dr
v OL L
Vl 2
Decel Inhibit
Waking
Not Synced
Phased ACB
Nibble 1 Nibble 2 Nibble 3 Nibble 4