Rockwell Automation Allen-Bradley LiquiFlo 2.0, User Manual

Page: 238 / 268

238 Rockwell Automation Publication D2-3518-4 - January 2020
Appendix B Using the OIM
To restore all parameters to their factory-default values, select Reset Defaults
from the Memory Storage menu.
Note that the parameter values are retained through a line dip or power
shutdown.
Loading and Saving User Sets
Drive configurations, called user sets, can be saved and recalled for use at any
time. Up to three user sets can be saved in the LiquiFlo drive.
• To save the current drive configuration, select Save to User Set from the
Memory Storage menu.
• To recall , or load , a user set, select Load Frm Usr Set from the Memory
Storage menu.
To identify which user set is active, select Active User Set from the Memory
Storage menu. The name of the last user set to be loaded into the drive is
displayed.
Active Set means factory defaults have been restored.
Monitoring the Drive Using
the Process Display Screen
on the OIM The process display screen enables you to monitor up to three process variables.
You can select the display, parameter, scale, and text for each process variable
being displayed.
The key toggles between the programming screen and the process display
screen. From the Main Menu screen, press F1 or F2 to select the process display
screen. In addition, the process display screen becomes active if no keys have been
pressed before the display timeout period expires. See
Setting the Display
Timeout Period on page 242 for information about setting the display timeout
period.
Figure 97 - Process (User) Display Screen
ESC/
PROG
P0: LiquiFlo 2.0
Auto
Stopped
Fltq
0.00 Volts
Amps
Hz
0.00
0.00
Customize up to
eight F-Key labels
Select up to
three process
variables to
monitor, and
customize the
text displayed
Scale the output
values to suit the
application