Rockwell Automation Allen-Bradley 1734-IB8S User Manual Download Page 89

Page: 89 / 212

Rockwell Automation Publication 1734-UM013J-EN-P - July 2014

Configure the Module in a GuardLogix Controller System

Chapter 5

g. From the Input Status pull-down menu, choose from the following.

h. From the Data Format pull-down menu, use the default ‘Integer’.

Click OK to return to the Module Properties dialog box.

Choose

Description

None

There are no status tags, only data for the outputs.

Pt. Status

There is one status tag for each output point.

Pt. Status - Readback

•

There is one status tag for each output point.

•

There is one data tag for the output readback.

Combined Status -
Readback - Power

•

A single BOOL tag represents an AND of the status bits for all the output
points. For example, if any output channel has a fault, this bit goes LO.

(1)

•

There is one data tag for the output readback.

•

A single BOOL tag represents the Output Power Status (error bit) from the
input assembly.

(1) When using combined status, use explicit messaging to read individual point status for diagnostic purposes.

Summary of Contents for Allen-Bradley 1734-IB8S





















































































































































































































Search results

Summary of Contents for Allen-Bradley 1734-IB8S

Reviews:

Related manuals for Allen-Bradley 1734-IB8S

Brands by name

Popular brands

Rockwell Automation Allen-Bradley 1734-IB8S, User Manual

Search results

Summary of Contents for Allen-Bradley 1734-IB8S

Reviews:

Related manuals for Allen-Bradley 1734-IB8S

Brands by name

Popular brands