162
Rockwell Automation Publication 1734-UM013J-EN-P - July 2014
Appendix C
Specifications
1734-IB8S temperature versus current derating for both
horizontal and vertical installations
Residual voltage, max
0.3V
Output leakage current, max
0.1 mA
Short circuit protection
Yes
POINTBus
POINTBus current, max
175 mA
Power dissipation, max
(1)
3.4 W
Power dissipation, typical
2.44 W
Thermal dissipation, max
11.62 BTU/hr
Isolation voltage
50V (continuous), Basic Insulation Type between field
side and system
No isolation between individual channels
Type tested at 707V DC for 60 s
Power bus, operating supply voltage
24V DC nom
Power bus, operating voltage range
19.2…28.8V DC
Power bus current (No Load), max
25 mA
Input filter time, OFF to ON
(2)
0…126 ms (in 6 ms increments)
Input filter time, ON to OFF
Terminal base screw torque
See terminal base specifications
Indicators
1 yellow lock status indicator
1 green/yellow power status indicator
8 I/O channel status indicators
Keyswitch positions (left and right)
1734-IB8S: Key 1 = 8 (left); Key 2 = 1 (right)
1734-OB8S: Key 1 = 8 (left); Key 2 = 2 (right)
North America temp code
T4
IEC temp code
T4
Enclosure type rating
None (open-style)
Wiring category
(3)
2 - on signal ports
Wire size
Determined by installed terminal block
Weight, approx
62.4 g (2.2 oz)
Dimensions (HxWxD), approx (without terminal block)
77 x 25 x 55 mm (3.03 x 0.98 x 2.17 in.)
(1) Maximum power dissipation applies when using 28.8V DC module supply, 30V DC on all inputs and maximum power dissipated
with all four test outputs in the ON state.
(2) Input off-to-on filter time is the time from a valid input signal to recognition by the module. Input on-to-off time is the time from a
valid input signal to recognition by the module.
(3) Use this conductor category information for planning conductor routing. Refer to the Industrial Automation Wiring and Grounding
Guidelines, publication
.
Attribute
1734-IB8S Series A
2.8 A
-20 °C
(-4 °F)
40 °C
(104 °F)
55 °C
(131 °F)
2.0 A
Summary of Contents for Allen-Bradley 1734-IB8S
