manualshive.com logo in svg

Rockwell Automation Allen-Bradley 1734-IB8S, User Manual

The Rockwell Automation Allen-Bradley 1734-IB8S is a high-performance input module. For comprehensive information on installation and operation, the User Manual is available for free download from manualshive.com. This manual provides detailed instructions and serves as a valuable resource for users seeking to optimize their experience with the product.

Share
Download
background image

88

Rockwell Automation Publication 1734-UM013J-EN-P - July 2014

Chapter 5

Configure the Module in a GuardLogix Controller System

c. From the Electronic Keying pull-down menu, choose the appropriate 

keying method from the following options.

d. From the Configured By pull-down menu, choose the method by 

which this module is configured.

e. From the Input Data pull-down menu, choose None.

None is the only valid selection, as this is an output-only safety module.

f. From the Output Data pull-down menu, choose from the following:

Choose

Description

Exact Match

All of the parameters must match or the inserted module rejects a 
connection to the controller.

Compatible Module

Lets an I/O module determine whether it can emulate the module defined 
in the configuration sent from the controller.

Choose

Description

This Controller

This selection directs the controller to configure and control the safety 
outputs.
The Output Data selection will be set to Safety.

External Means

This selection directs the controller to establish a safety input connection 
only, and the controller will not configure the module or be able to control 
the safety outputs.
The Output Data selection will be set to None.

Choose

Description

Safety

Automatically selected when Configured By = This controller. Results in an output 
connection. Selecting Safety creates output tags and enables these outputs for use in the 
Safety Task.

None

Automatically selected when Configured By = External. Selecting None results in an 
input only connection to the module. Status is read, but no outputs are written.

Summary of Contents for Allen-Bradley 1734-IB8S





















































































































































































































Reviews:

No comments

Related manuals for Allen-Bradley 1734-IB8S

Vancare P400 Owner'S Manual preview
P400
Brand: Vancare Pages: 31
Magnavox AZ8350 - Cd Radio Cass Recorder Operating Instructions Manual preview
AZ8350 - Cd Radio Cass Recorder
Brand: Magnavox Pages: 18
CAME BPT XTS 7IP WH WIFI Installation And Configuration Manual preview
XTS 7IP WH WIFI
Brand: CAME BPT Pages: 24
V-Tec DMR11 Quick Installation Manual preview
DMR11
Brand: V-Tec Pages: 2
RKC INSTRUMENT FAREX SR MINI SYSTEM Communication Instruction Manual preview
FAREX SR MINI SYSTEM
Brand: RKC INSTRUMENT Pages: 82
urmet domus 1038/40 Manual preview
1038/40
Brand: urmet domus Pages: 30
Wayne-Dalton Torque Master Plus 9100 Installation Instructions And Owner'S Manual preview
Torque Master Plus 9100
Brand: Wayne-Dalton Pages: 44
Globe GL-RES Series Manual preview
GL-RES Series
Brand: Globe Pages: 4
TBM TB1601 Instruction Manual preview
TB1601
Brand: TBM Pages: 21
CyberData 011306 Installation Quick Reference preview
011306
Brand: CyberData Pages: 2
Yetter AIR ADJUST 2940 Operator'S Manual preview
AIR ADJUST 2940
Brand: Yetter Pages: 64
M-system R3-SV8A Instruction Manual preview
R3-SV8A
Brand: M-system Pages: 3
ION Sound Lounge Quick Start Manual preview
Sound Lounge
Brand: ION Pages: 16
Ruby Tech CRS0015 Instruction Manual preview
CRS0015
Brand: Ruby Tech Pages: 13
Grace Digital Audio products Warranty Information Booklet preview
Audio products
Brand: Grace Digital Pages: 1
MAHLE CWL-20 Operation Manual preview
CWL-20
Brand: MAHLE Pages: 20
Hama BA-2180 Operating Instructions Manual preview
BA-2180
Brand: Hama Pages: 45
Brocade Communications Systems Brocade M6505 Quick Start Manual preview
Brocade M6505
Brand: Brocade Communications Systems Pages: 10

Brands by name

Popular brands

Load more brands