2 0 0 H o u r S e r v i c e
C h a r g e r D a m p e r ™ I n s t a l l a t i o n
Remove the rebound bolt from the rebound damper shaft.
Spray isopropyl alcohol on the Charger Damper™ assembly and clean it with
a rag.
Insert and thread the Charger Damper into the top of the drive side upper
tube.
Use a torque wrench with a 30 mm socket to tighten the compression top
cap to 28 N•m (250 in-lb).
1
2
3
30 mm
28 N•m (250 in-lb)
39
Charger Damper™ Installation
