Use your fingers or a pick to remove the top cap o-ring.
Use your fingers to install a new o-ring.
Do not apply any grease to the top cap threads.
Dual Position Air™:
Push the air shaft into the upper tube to prevent it from
getting scratched while removing the retaining ring.
NOTICE
Scratches on the air shaft will allow air to bypass the seal head into the
lower leg, resulting in reduced spring performance.
Use a flat blade screwdriver to push the DPA seal head tab under the
retaining ring.
Place the tips of large retaining ring pliers into the eyelets of the retaining
ring. Press firmly on the pliers to push the DPA seal head into the upper
tube enough to compress and remove the retaining ring.
3
DPA
SA
DJ
4
DPA
DPA
DPA
17
Air Spring Removal
