RCT3:
Insert the low speed compression adjuster into the compression cam
assembly. Push down and turn the low speed compression adjuster
clockwise until it clicks into place.
RC:
Use needle-nose pliers to insert the bleed plug into the compression
adjuster until it clicks into place.
Use retaining ring pliers to install the inner retaining ring into the retaining
ring groove.
Check that the retaining ring is properly seated in the retaining ring
groove by using the retaining ring pliers to rotate the retaining ring and
seal head back and forth a few times.
RCT3:
The low speed compression adjuster must be installed properly for
the retaining ring to be seated in its grove.
RC:
The bleed plug must be installed properly for the retaining ring to be
seated in its grove.
Test the Bleed:
Rotate the compression adjuster cam
clockwise
until it
stops. This is the locked position.
8
RCT3
RC
9
10
15 mm
37
Charger Damper™ Bleed
