L o w e r L e g A s s e m b l y
5 0 / 2 0 0 H o u r S e r v i c e
L o w e r L e g I n s t a l l a t i o n
Spray isopropyl alcohol on the upper tubes and clean them with a rag.
Apply a liberal amount of SRAM® Butter to the inner surfaces of the dust
wiper seals.
Slide the lower leg assembly onto the upper tube assembly just enough to
engage the upper bushing with the upper tubes.
Make sure both dust wiper seals slide onto the tubes without folding the
outer lip of either seal.
Position the fork at a slight angle with the bottom bolt holes oriented
upward. Angle the RockShox® syringe fitting in each lower leg bolt hole so
as not to fill the shaft. Inject 10 mL of RockShox 0w-30 suspension oil into
the drive side leg, and 10 mL of RockShox 0w-30 suspension oil into the
non-drive side leg.
NOTICE
Do not exceed the recommended oil volume per leg as this can damage
the fork.
Lower Leg Oil Volume
Spring Side
10 mL
Damper Side
10 mL
1
2
3
4
0w-30
RockShox bleed syringe
42
Lower Leg Assembly
