2 0 0 H o u r S e r v i c e
L o w e r L e g S e a l S e r v i c e
Place the tip of a downhill tire lever underneath the lower lip of the dust
wiper seal.
NOTICE
If using a flat blade screwdriver, make sure it has a round shaft. A
screwdriver with a square shaft will damage the fork leg.
Stabilize the lower leg on a bench top or on the floor. Press down on the tire
lever handle to remove the dust wiper seal. Discard the wiper seal.
Repeat on the other side.
NOTICE
Keep the lower leg assembly stable. Do not allow the lower leg to twist in
opposite directions, compress toward each other, or be pulled apart. This
will damage the lower leg.
Use your fingers to remove and discard the foam rings inside the lower leg.
Spray isopropyl alcohol on the inside and outside of the lower leg. Clean
the outside of the lower leg with a rag.
Wrap a rag around a long dowel and insert it into each lower leg to clean
the inside of the lower leg.
1
2
3
4
12
Lower Leg Seal Service
