D a m p e r S e r v i c e
2 0 0 H o u r S e r v i c e
C h a r g e r D a m p e r ™ R e m o v a l
NOTICE
Inspect each part for scratches. Do not scratch any sealing surfaces when
servicing your suspension. Scratches can cause leaks.
When replacing seals and o-rings, use your fingers or a pick to remove the
seal or o-ring. Spray isopropyl alcohol on each part and clean with a rag.
Apply SRAM® Butter grease to the new seal or o-ring.
RCT3:
Turn the low speed compression and compression mode knobs
counter clockwise until they stop, to the full open positions.
The compression damper must be in the full open position in order to
perform the bleed procedure.
RC:
Turn the low speed compression adjuster knob counter clockwise until
it stops, to the full open position.
The compression damper must be in the full open position in order to
perform the bleed procedure.
1
RCT3
Low speed
RCT3
Compression mode
RC
Low speed
24
Damper Service
