O p t i o n a l R e b o u n d R e - t u n e
The Charger Damper™ in Pike® comes with additional shims installed on the piston to allow the rider to modify the rebound tune.
If your rebound setting is one or two clicks from open, we recommend changing to a soft tune on the rebound. If your rebound setting is one or two clicks
from closed, we recommend changing to a firm tune on the rebound.
All Charger Dampers in Pike ship with the Medium Damper Tune installed.
Clamp the bottom of the rebound damper shaft into a RockShox® Rear
Shock Vise Block.
NOTICE
To prevent damage to the rebound damper shaft, do
not clamp the middle of the shaft in the vise.
Use a 10 mm socket to remove the piston nut. Use your hand to stabilize
the rebound damper shaft.
Use a small wrench or pick to slide the shims off of the rebound damper
piston. Set the shims on a rag in the order they came off of the piston.
1
2
10 mm
Small wrench
3
28
Optional Rebound Re-tune
