manualshive.com logo in svg

Roche ACCU-CHEK Inform II, Operator'S Manual

The Roche ACCU-CHEK Inform II operator's manual is an essential resource for users of this innovative product. You can easily access and download the manual for free from our website, ensuring you have all the necessary instructions and information to maximize the performance of your ACCU-CHEK Inform II.

Share
Download
background image

4

 • Glucose Control Testing

64

Confirming or selecting the test 
strip lot

Once you have entered and confirmed the lot number of 
the control solution, you are asked to choose the lot 
number for the test strips. Compare the number dis-
played by the meter to the number on the label of the test 
strip vial. 

1

Select the lot number as follows:

■

To read the lot number from the test strip vial via 
barcode scanner, press and release 

. Follow 

the instructions for scanning IDs. *

■

If you want to use the preselected lot number dis-
played by the meter, touch 

 to confirm.

■

To use a different lot number than the one dis-
played, touch 

 to display a list of stored lot 

numbers. Select the desired lot number from the 
list.

2

Touch 

 to confirm the selected test strip lot 

number.

For additional information about storing lot numbers for 
test strips, see page 73.

* Barcodes on control solutions may not be available in all 
countries (see page 47).

The meter can be configured so that manual 
confirmation is not necessary. In this setup, only the 
lot number is displayed. Additional options are not 
available.

The meter can be configured so that lot numbers are 
entered via barcode scanner only. *

The meter can be configured so that lot numbers can 
only be selected from a list.

Control Test

Control L2 (Hi) 123456

Use Strip Lot

12:48 pm

09/18/13

123456?

Strip Lots

344789

545794

545777

344654

12:48 pm

09/18/13

Summary of Contents for ACCU-CHEK Inform II





















































































































































































































Reviews:

No comments

Related manuals for ACCU-CHEK Inform II

i-SENS CareSens N Pop Owner'S Booklet preview
CareSens N Pop
Brand: i-SENS Pages: 27
Contour Next Link 2.4 User Manual preview
Next Link 2.4
Brand: Contour Pages: 39
Accu-Chek Inform II Operator'S Manual preview
Inform II
Brand: Accu-Chek Pages: 248
AIDIAN Nova StatStrip Brief Instructions preview
Nova StatStrip
Brand: AIDIAN Pages: 2

Brands by name

Popular brands

Load more brands