Roche ACCU-CHEK Inform II, Operator'S Manual

Page: 37 / 212

Powering Up and Entering an Operator ID •
2
37
If wireless connectivity is activated, the ( RF OFF )
icon is displayed as a button in the
Power Up
screen.
■
To temporarily disable the wireless network con-
nection, touch (
RF OFF
) in the
Power Up
screen. The icon then changes to ( RF ON ).
■
To temporarily enable the wireless network con-
nection, touch ( RF ON ) in the Power Up
screen. The icon then changes to (
RF OFF
).
The RF ON/RF OFF button always displays the option you
currently have. The current communication status is dis-
played in the status bar (bottom line) of the display in all
menus and screens.
■
The icon is displayed, if wireless connectivity is
enabled.
■
The icon is displayed if the last attempt to com-
municate with the data management system was
successful and was terminated according to the
communication protocol.
■
The icon is displayed if the last attempt to
communicate with the data management system
was not successful or was unintentionally termi-
nated. If this icon persists, contact your system
administrator. Ignoring this information may lead to
a
Download Lockout
(if configured, see page 41).
Closing startup Once you have completed all the necessary changes,
■
touch to proceed to the screen used to enter
the operator ID, or
■
wait 5 seconds and the meter automatically pro-
ceeds to the screen used to enter the operator ID.
Contrast
Power Up 12:48 pm
09/18/13
Contrast
Power Up 12:48 pm
09/18/13