Roche ACCU-CHEK Inform II, Operator'S Manual

Page: 32 / 212

1
• Introduction
32
Electrical connections are located on the back of the base
unit (for a better view the removable wall mount is shown
as transparent).
For instructions on connecting the base unit, see
Chapter 9.
1.7 Overview of the Accu-Chek Inform II Base Unit Hub
The Accu-Chek Inform II Base Unit Hub is able to con-
nect up to 4 Accu-Chek Inform II Base Units Light (RJ25)
and supports communication to a data management
system via Ethernet (RJ45).
The hub also provides power for the Accu-Chek Inform II
Base Unit Light. When connected to a hub an Accu-Chek
Inform II Base Unit Light does not require a separate
power supply. The LED colors of the hub are the same as
for the Accu-Chek Inform II Base Unit Light.
17 Status LED (lights up when power is connected)
18
Jack for the power supply unit provided
20 Network connection — LAN, Ethernet (RJ45)
21
USB connection
22 Connections for up to 4 Accu-Chek Inform II Base
Units Light (RJ25, data transfer, and power)
20 18
17
22 21