manualshive.com logo in svg

Roche ACCU-CHEK Inform II, Operator'S Manual

The Roche ACCU-CHEK Inform II operator's manual is an essential resource for users of this innovative product. You can easily access and download the manual for free from our website, ensuring you have all the necessary instructions and information to maximize the performance of your ACCU-CHEK Inform II.

Share
Download
background image

Introduction • 

1

25

Roche supports industry wireless standards and recom-
mends using products that have Wi-Fi certification. This 
certification tests products to the 802.11 industry stand-
ards for basic connectivity, security, authentication, Qual-
ity of Service (QoS), interoperability and reliability. The 
Wi-Fi CERTIFIED logo is an assurance that the Wi-Fi Alli-
ance has tested a product in numerous configurations 
and with a diverse sampling of other devices to ensure 
compatibility with other Wi-Fi CERTIFIED equipment that 
operates in the same frequency band. The Wi-Fi Alliance 
network of independent test labs conducts interoperabil-
ity testing programs to ensure that wireless devices work 
together and support secure connections.

The Accu-Chek Inform II system complies with FCC radi-
ation exposure limits set forth for an uncontrolled envi-
ronment. This equipment should be installed and 
operated with minimum distance of 20 cm (8 inches) 
between the radiator and your body.

This transmitter must not be co-located or operated in 
conjunction with any other antenna or transmitter. 

Changes or modifications made to this equipment not 
expressly approved by Roche Diagnostics may void the 
FCC authorization to operate this equipment.

This device complies with Part 15 of the FCC Rules and 
with RSS-210 of Industry Canada. Operation is subject to 
the following two conditions:

(1) this device may not cause harmful interference,

and

(2) this device must accept any interference received, 
including interference that may cause undesired operation.

Summary of Contents for ACCU-CHEK Inform II





















































































































































































































Reviews:

No comments

Related manuals for ACCU-CHEK Inform II

eoshealth IN TOUCH Owner'S Manual preview
IN TOUCH
Brand: eoshealth Pages: 89
Medicus GlucoDr. auto AGM-4000 User Manual preview
GlucoDr. auto AGM-4000
Brand: Medicus Pages: 50
Smart Lab Sprint nG User Manual preview
Sprint nG
Brand: Smart Lab Pages: 42
bewell connect MyGluco BW-GL1 Manual preview
MyGluco BW-GL1
Brand: bewell connect Pages: 36
WaveSense jazz Oweners Manual preview
jazz
Brand: WaveSense Pages: 34

Brands by name

Popular brands

Load more brands