1 ABOUT THIS MANUAL
Manual ERZ2000-DI · EN1.2 · 2017, December 21st
10
Danger
-
The wiring from and installation of the flow computer ERZ2000-DI in
explosion-prone areas must only be carried out by trained person-
nel in accordance with EN60079-14 and in observance of national
regulations.
-
Qualified persons must satisfy the definitions in accordance with
DIN EN 0105 or IEC 364 or directly comparable standards.
-
Only trained and instructed personnel are permitted. Work on the
measuring system must only be carried out from qualified persons
and inspected by responsible qualified supervisors.
-
Qualified persons have been authorized by the person responsible
for safety of personnel to carrying out such work on the basis of
their training, experience or instruction and familiarity with applica-
ble standards, provisions, accident prevention regulations and sys-
tem conditions. It is essential that these persons are able to recog-
nize and avoid potential dangers in good time.
1.2.5
Applicability of the manual
This manual describes the flow computer ERZ2000-DI. The ERZ2000-DI is only
part of a complete system. The manuals of the other components of the system
must be observed. If you find contradictory instructions, contact RMG and/or the
manufacturers of the other components.
Caution
Ensure that the power data of the current connection matches the specifi-
cations on the type plate. Observe any applicable national regulations in
the country of use. Use cable that is appropriate for the cable fittings.
1.2.5.1
Danger during operation
Observe the specifications of the system manufacturer and/or system operator.
