04015856 ’05-11-1KS
Copyright © 2005 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.
*
0
4
0
1
5
8
5
6
-
0
1
*
Upgrading from the
to the
This guide explains how to upgrade the DV-7DL-G to the DV-7DL PRO Studio Edition.
●
Both the included installation CD-ROM and the installation hard disk are
required in order to perform the update.
022c
●
Before installing the hard disk, you must first always turn off the
your device and unplug its power cord.
552
●
Unfortunately, it may be impossible to restore the contents of data that was
stored on a hard disk once it has been lost. EDIROL/Roland assumes no
liability concerning such loss of data.
558a
●
To avoid disturbing your neighbors, try to keep the unit's volume at
reasonable levels. You may prefer to use headphones, so you do not need
to be concerned about those around you (especially when it is late at
night).
563
●
Unauthorized duplication, reproduction, hiring, and lending prohibited.
564
●
Before you open the included CD-ROM, you must read the “End User
License Agreement.” Opening the CD-ROM will be taken to mean your
acceptance of the license agreement.
Handling CD-ROMs
023
●
DO NOT play a CD-ROM disc on a conventional audio CD player.
The resulting sound may be of a level that could cause permanent
hearing loss. Damage to speakers or other system components
may result.
801
●
Avoid touching or scratching the shiny underside (encoded surface) of the
disc. Damaged or dirty CD-ROM discs may not be read properly. Keep
your discs clean using a commercially available CD cleaner.
Projects on the Installation Hard Disk
***
●
The projects on the installation hard disk use video material from Artbeats,
Inc. For information on the usage restrictions for this video material, refer
to the Artbeats End User License Agreement.
981b
●
Other than for your own personal enjoyment, use of the sample projects
included on the installation hard disk without the express consent of the
copyright holder is prohibited by law.
Upgrading adds DV-7DL PRO features and DV-7DL PRO Studio Edition
features.
DV-7DL PRO Features
A/B Roll editing, Transition Effects: Diffusion/Door, Roll/Crawl setting
etc.
*
For information about the features of the DV-7DL PRO, refer to the “DV-7DL-G/
DV-7DL PRO Ver. 2 Owner’s Manual” that comes with the unit.
DV-7DL PRO Studio Edition Features
Infinity Roll editing, Waveform Monitor, Vectorscope
etc.
*
For information about the features of the DV-7DL PRO Studio Edition, refer to the
“Features Added with the DV-7DL PRO Studio Edition” which is packaged with
the product.
Be sure to perform the upgrade according to the steps described below.
1.
Press the power button on the front panel of the DV-7DL-G.
The DV-7DL-G starts and the “Project Management” window appears.
2.
Press the EJECT button for the CD-ROM drive on the front of the
DV-7DL-G unit and load the included “Installation CD for the
DV-7DL-G.”
3.
At the “Project Management” window, click
.
Clicking the “EXIT” button automatically turns off the power.
4.
After the power has been turned off, load the included installation
hard disk into the unit.
5.
Press the power button a second time.
6.
The upgrade screen appears. Click
.
7.
The “Software License Agreement” window appears.
Read it carefully, and if you agree to its terms, click to select this
item: Agree. Once the appropriate item has been selected, you can
click .
The preparations for upgrading start.
8.
When the preparations for upgrading are complete, the “Start to
Install” window appears. Click
.
The upgrade process starts. Upgrading takes three to four minutes to
complete.
9.
A window announcing the end of the upgrade appears. Click
.
The tray for the CD-ROM drive opens, and the power turns off
automatically.
10.
Take the CD-ROM out of the tray.
11.
Press the power button.
*
In the interest of product improvement, the specifications and/or contents of this
package are subject to change without prior notice.
Important Notes
Added Features
This upgrade kit is valid for only a single DV-7DL-G unit.
It is designed not to allow further updates once the upgrade has been
completed successfully.
A message like the one shown below may appear. If this happens,
then the upgrade cannot be performed because of the reason
given in the message. Clicking the “Quit” button switches off the
power to the DV-7DL-G.
How to Upgrade
The displayed message varies
according to the situation.
While the upgrade is in progress, never press the power button or
press the EJECT button to remove the CD-ROM.
If a startup screen for the
DV-7DL PRO Studio Edition
like the one shown at left
appears, it means the upgrade
was completed successfully.
DLG-SE-N_install_e 1 ページ ２００５年１１月１１日 金曜日 午後２時５３分
