2 INTRODUCTION
Manual ERZ2000-DI · EN1.2 · 2017, December 21st
49
Deactivation of the access protection
The access protection can be deactivated with the touchscreen of the ERZ2000-DI
(see
Figure 35: Deactivation of the access protection
) and with the browser (see
Figure 23: Error messages
). The button "Forget code word" becomes visible in the
touchscreen display after clicking on the "Message" tab to the right (
Figure 35: De-
activation of the access protection
). By clicking on the button, "single code" and
"double code" are closed. The text on
Figure 23: Error messages
describes how to
activate the error message. The "single code" and "double code" access are also
closed here by clicking on the "Acknowledge faults" button. The calibration lock is
closed by turning it counterclockwise.
Figure 35: Deactivation of the access protection
Note
Normally, the calibration is now sealed by a calibration official.
In order to finish the adjustment of the access authorization and the user profile,
the user profile must be entered in the menu
NA Wizard
. This is carried out most
easily by opening the wizard (see above).
