Appendix
Manual ERZ2000-DI · EN1.2 · 2017, December 21st
120
x
Activate coordinate
LC40 Service mode
("yes") in order to prevent an automatic de-
vice, reset (watchdog) during subsequent steps.
Close the application
x
Click on the "Service" tab on the touch screen
x
Select and execute the "Close program" function.
Start Windows Explorer
x
Click on the "Start" button.
x
Click on "Programs".
x
Click on "Windows Explorer".
Start FlashloadCE
x
"SDCard" (double-click)
x
"TOOLS" (double-click)
x
"FlashloadCE" (double-click)
Monitor the output window
x
After the program start, messages that the COM3 and CAN-bus required for flashing
have been opened must appear:
"CAN opened successfully!"
"COM3: opened successfully!"
Start the bootloader
x
Click on the menu item "Flash > Reset BIOS".
Monitor FlashloadCe
x
A message that the connection between FlashloadCE and the bootloader was estab-
lished appears in the output window (to the right):
"Device is connected!"
x
Various information can be read in the status window (to the left), such as the ver-
sion of the bootloader.
Load flow computer BIOS
x
Click on the menu item "File > Open".
x
Select the BIOS file on the "SDCard" in the subdirectory "Bin".
