RME Audio Fireface 802, User Manual

Page: 71 / 112

User's Guide Fireface 802 © RME 71
Snapshots
¾
Do not load Main volume/balance.
The values stored in the Snapshot are not loaded for
the Main Out, so the current setting is not changed.
Device Handling
¾
Always init DSP devices with TotalMix FX settings.
Used to suppress the mismatch
message after using the unit stand-alone. Settings in the unit are lost.
¾
Count MADI Channels per port.
Not available with the Fireface 802.
¾
Disable ASIO Direct Monitoring.
Disables ASIO Direct Monitoring (ADM) for the Fireface
802 within TotalMix FX.
Graphics
¾
Use D2D (Change requires restart).
Default on. Can be deactivated to use a compatible
but CPU-taxing graphics mode, in case graphics problems show up.
Store Setting for (Windows only)
¾
All Users (Restart required).
See next chapter.
Special Options
¾
Lock User Interface.
Default off. Can be activated to freeze the current mix state. Faders,
buttons and knobs relating to the mix state can not be moved anymore.
25.7.1 Store for Current or All Users (Windows)
TotalMix FX stores all settings, workspaces and snapshots for the
current user
in:
XP
: C:\Documents and Settings\ Username\Local Settings\ Application Data\TotalMixFX
Vista/7/8
: C.\Users\Username\AppData\Local\TotalMixFX
Current User
ensures that when workstations are used by several people they all find their own
settings. In case the settings should be identical or given for any user, TotalMix FX can be
changed to use the
All User
directory. An admin could even write protect the file
lastFire-
face8021.xml
, which results in a complete reset to that file’s content whenever TotalMix FX is
restarted. The xml-file is updated on exit, so simply set up TotalMix as desired and exit it (right
mouse click on the symbol in the notification area).