RME Audio Fireface 802, User Manual

Page: 10 / 112

10 User's Guide Fireface 802 © RME
The rear panel of the Fireface 802 features eight analog inputs and outputs, the power socket,
and all digital inputs and outputs:
Balanced Line Level Inputs.
8 balanced analog inputs via 6.3 mm stereo TRS.
Balanced Line Level Outputs.
8 balanced analog outputs, six via 6.3 mm stereo TRS, two via
XLR.
AES/EBU I/O.
XLR. The Fireface
802 accepts the commonly used
digital audio formats, SPDIF as well
as AES/EBU.
ADAT1 I/O.
TOSLINK. Standard
ADAT optical port, 8 channels.
ADAT2 I/O.
TOSLINK. Standard ADAT optical port, 8 channels. Can also be used as optical
SPDIF input and output, if set up accordingly in the Settings dialog.
Word Clock I/O.
BNC. A push switch activates internal termination (75 Ohms). With termination
activated the yellow LED besides the switch will light up.
Remote.
Mini-DIN. Connector for the optional Advanced Remote Control with Volume, Store,
Dim, Recall and other functions.
USB 2.0.
USB socket for connection to the computer.
FW 400.
6-pin and 9-pin FireWire socket for connection to the computer.
MIDI I/O.
Two 5-pin DIN connectors provide the first MIDI input and output.
IEC receptacle
for mains power connection.
The specially developed, internal hi-
performance switch mode power supply
makes the Fireface operate in the range of
100V to 240V AC. It is short-circuit-proof, has
an integrated line filter, is fully regulated
against voltage fluctuations, and suppresses
mains interference.