RME Audio Fireface 802, User Manual

Page: 26 / 112

26 User's Guide Fireface 802 © RME
11. DIGICheck Windows
The DIGICheck software is a unique utility developed for testing, measuring and analysing digi-
tal audio streams. Although this Windows software is fairly self-explanatory, it still includes a
comprehensive online help. DIGICheck 5.70 operates as multi-client ASIO host, therefore can
be used in parallel to any software, be it WDM or ASIO, with both inputs and outputs (!). The
following is a short summary of the currently available functions:
•
Level Meter
. High precision 24-bit resolution, 2/8/30 channels. Application examples: Peak
level measurement, RMS level measurement, over-detection, phase correlation measure-
ment, dynamic range and signal-to-noise ratios, RMS to peak difference (loudness), long
term peak measurement, input check. Oversampling mode for levels higher than 0 dBFS.
Vertical and horizontal mode. Slow RMS and RLB weighting filter. Supports visualization ac-
cording to the K-System.
•
Hardware Level Meter
for
Input
,
Playback
and
Output
. Reference Level Meter freely con-
figurable, causing near zero CPU load, because calculated from the Fireface hardware.
•
Vector Audio Scope
. World wide unique Goniometer showing the typical afterglow of a
oscilloscope-tube. Includes Correlation meter and level meter.
•
Spectral Analyser.
World wide unique 10-, 20- or 30-band display in analog bandpass-filter
technology. 192 kHz-capable!
•
Totalyser
. Spectral Analyser, Level Meter and Vector Audio Scope in a single window.
•
Surround Audio Scope.
Professional Surround Level Meter with extended correlation
analysis, ITU weighting and ITU summing meter.
•
ITU1770/EBU R128 Meter
. For standardized loudness measurements.
•
Bit Statistics & Noise
. Shows the true resolution of audio signals as well as errors and DC
offset. Includes Signal to Noise measurement in dB and dBA, plus DC measurement.
•
Channel Status Display
. Detailed analysis and display of SPDIF and AES/EBU Channel
Status data.
•
Global Record.
Long-term recording of all channels at lowest system load.
•
Completely multi-client.
Open as many measurement windows as you like, on any chan-
nels and inputs or outputs!
To install DIGICheck, go to the
\DIGICheck
directory on the RME Driver CD and run
setup.exe
.
Follow the instructions prompted on the screen.
DIGICheck is constantly updated. The latest version is always available on our website
www.rme-audio.com
, section
Downloads / DIGICheck
.