RME Audio Fireface 802, User Manual

Page: 78 / 112

78 User's Guide Fireface 802 © RME
Store current state into device.
The unit can store up to 6 setups (the current state) in its own
memory. This function has been developed especially for the stand-alone mode operation,
where there are no playback channels. Therefore using it under Windows, Mac or iOS will result
in incomplete setups.
The setups stored into the unit can be recalled both via simple MIDI notes (see chapter 28.6) as
well as the optional Advanced remote Control (keys A to F).
Enable Stand-Alone MIDI.
Not connected to a computer the Fireface 802 can still be controlled
directly by MIDI. See chapter 28.6.
Activate CC mode on disconnect.
With this entry checked the Fireface 802 will boot into
Class Compliant mode as soon as the connection to the computer is interrupted (computer
turned off, USB cable disconnected etc). On reconnection to the computer the interface is de-
tected despite being in CC mode, and TotalMix FX will immediately turn off the CC mode auto-
matically.
Note: When the computer enters standby mode (sleep) the interface will not change to CC
mode, as there is no disconnection – just a temporary one until the computer is switched back
on.