RME Audio Fireface 802, User Manual

Page: 107 / 112

User's Guide Fireface 802 © RME 107
36.2 Connector Pinouts
TRS jacks of analog input / output
The stereo 1/4" TRS jacks of the analog inputs and outputs are wired according to international
standards:
Tip = + (hot)
Ring =
–
(cold)
Sleeve = GND
The servo balanced input and output circuitry allows to use monaural TS jacks (unbalanced)
with no loss in level. This is the same as when using a TRS-jack with ring connected to ground.
XLR jacks of analog inputs
The XLR jacks are wired according to international standards:
1 = GND (shield)
2 = + (hot)
3 = - (cold)
TRS Phones jack
The analog monitor outputs on
the front are accessible
through stereo 1/4" TRS jacks.
This allows a direct connection
of headphones. In case the
output should operate as Line
output, an adapter TRS plug to
RCA phono plugs, or TRS plug
to TS plugs is required.
The pin assignment follows
international standards. The left
channel is connected to the tip,
the right channel to the ring of
the TRS jack/plug.