RME Audio Fireface 802 User Manual Download Page 111 | Manualshive

Page: 111 / 112

background image

User's Guide Fireface 802

© RME

111

39. Appendix

RME news, driver updates and further product information are available on our website:

http://www.rme-audio.com

Distributor: Audio AG, Am Pfanderling 60, D-85778 Haimhausen, Tel.: (49) 08133 / 918170

Manufacturer:
IMM Elektronik GmbH, Leipziger Strasse 32, D-09648 Mittweida

Trademarks

All trademarks, registered or otherwise, are the property of their respective owners. RME,
DIGICheck and Hammerfall are registered trademarks of RME Intelligent Audio Solutions.
DIGI96, SyncAlign, ZLM, SyncCheck, TMS, TotalMix and Fireface are trademarks of RME Intel-
ligent Audio Solutions. Alesis and ADAT are registered trademarks of Alesis Corp. ADAT optical
is a trademark of Alesis Corp. Microsoft, Windows, Windows XP, Windows Vista and Windows
7 are registered trademarks or trademarks of Microsoft Corp. Steinberg, Cubase and VST are
registered trademarks of Steinberg Media Technologies GmbH. ASIO is a trademark of
Steinberg Media Technologies GmbH. iPad, FireWire, the FireWire symbol and the FireWire
logo are trademarks of Apple Computer, Inc.

Copyright

©

Matthias Carstens, 03/2014. Version 1.0

Current driver and Firmware versions
USB: Windows 1.043, Mac OS X: 1.95, Firmware 11, CC5
FireWire: Windows 3.085, Mac OS X: 3.22, Firmware 5
DSP: Firmware 6. TotalMix FX: 0.999

Although the contents of this User’s Guide have been thoroughly checked for errors, RME can
not guarantee that it is correct throughout. RME does not accept responsibility for any mislead-
ing or incorrect information within this guide. Lending or copying any part of the guide or the
RME Driver CD, or any commercial exploitation of these media without express written permis-
sion from RME Intelligent Audio Solutions is prohibited. RME reserves the right to change
specifications at any time without notice.

«
...
109
110
111
112
»

Summary of Contents for Fireface 802

















































































































Reviews:

No comments

Related manuals for Fireface 802

Brand: UniPOS Pages: 2

Brand: Eonon Pages: 35

Brand: Radio Shack Pages: 16

Brand: Eaton Pages: 131

UltraShift PLUS

Brand: Eaton Pages: 266

Brand: JBL Pages: 2

Brand: uAvionix Pages: 4

Brand: Abus Pages: 2

Brand: VocoPro Pages: 28

Brand: ViziT Pages: 11

Brand: Qvis Pages: 32

Brand: RTRMAX Pages: 14

Brand: greenPRO Pages: 26

Brand: Vega Pages: 16

Brand: Everlast Pages: 30

Brand: TIP TEMPerature Products Pages: 7

Brand: Delphi Pages: 12

Brand: HURNER Pages: 69

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands