RK Rose+Krieger RK MultiControl II duo, Assembly Instructions Manual

Page: 201 / 230

Prerequisites:
n The synchronisation bus is connected
Ä
Page 158 .
n The bus system has been activated Ä Page 199 .
n The main menu for the hand switch is displayed
Ä
Page 169 .
Call up the menu via “Control”
®
“Sync-BUS settings”
®
“Deactivate BUS connection” (Fig. 109).
ð
The bus system is deactivated.
7.5.6 “Memory positions for IO Interface” menu
This function can be used to configure and assume
the seven IO interface memory positions.
To save a memory position, it first has to be
assumed using the IO interface module
Ä
Page
139.
7.5.6.1 Storing memory positions
Prerequisites:
n The drive position being saved has been assumed.
n The main menu for the hand switch is displayed
Ä
Page 169 .
1. Select the menu via “Control”
®
“ Memory positions for IO
Interface”
®
“Store memory positions” (Fig. 110).
Selecting a menu
Fig. 109: Selecting a menu
Selecting a menu
Fig. 110: Selecting a menu
Operating the hand switch with 6 function buttons
Control menu > Memory positions for IO Interface menu
20.08.2021 Control unit RK MultiControl II duo/RK MultiControl II quadro 201