RK Rose+Krieger RK MultiControl II duo, Assembly Instructions Manual

Page: 195 / 230

If drive group management is activated, this func-
tion only affects drives of the drive group in which it
has been activated.
Therefore, the function has to be activated sepa-
rately for every affected drive group.
7.5.4.2 “Set external stop” menu
An operator's stop input switch can be connected
to the MultiControl II to safeguard crushing and
shearing points Ä Page 157.
The stop input is deactivated in the factory.
Prerequisites:
n The operator's stop input switch is connected Ä Page 157 .
n The main menu for the hand switch is displayed
Ä
Page 169 .
1. Select the menu via “Control”
®
“Stop functions”
®
“Set
external stop” (Fig. 99).
2. Select “Activate stop input” (Fig. 100).
ð
The stop input switch has been activated.
Selecting a menu
Fig. 99: Selecting a menu
Activating the stop input
Fig. 100: Activating the stop input
Operating the hand switch with 6 function buttons
Control menu > Stop functions menu
20.08.2021 Control unit RK MultiControl II duo/RK MultiControl II quadro 195