RK Rose+Krieger RK MultiControl II duo, Assembly Instructions Manual

Page: 168 / 230

4. Select the menu item “Stroke settings” :
n Press and hold the buttons until the menu item
“Stroke settings” is displayed.
n Confirm the selection with the button ( ).
ð
The menu item “Stroke settings” (Fig. 34) has been
selected.
5. Select the menu item “Change basic height” :
n Press and hold the buttons until the menu item
“Change basic height” is displayed.
n Confirm the selection with the button ( ).
ð
The menu item “Change basic height” (Fig. 35) has
been selected.
6. Press the buttons until the basic height (Fig. 36) has
been set.
If necessary, press the button ( ) to
jump a position to the right in the param-
eter.
7. After changing the final position or unit of the parameter,
press the button ( ).
ð
The basic height has been set.
Fig. 34: “Stroke settings” menu
Fig. 35: “Change basic height”
menu
Setting the basic height
Fig. 36: Entering a value
Operating the hand switch with 6 function buttons
Navigation
20.08.2021 Control unit RK MultiControl II duo/RK MultiControl II quadro 168