Prerequisite:
n
Drive group management is currently activated.
No drive group is activated for parallel move-
ment.
Press the
buttons to move the drive groups
and
in parallel (
).
ð
The drive groups move at the respective set speed.
If one drive group stops in a final position during parallel
movement, the other drive group continues moving.
Prerequisite:
n
Drive group management is currently activated.
1.
Press the button (
) and the button (
) to acti-
vate both drive groups.
ð
The selected drive groups are currently activated and are
displayed inversely (
or
).
2.
Press the
buttons to move the drive groups
and
synchronously (
).
ð
Both drive groups move at the respective set speed.
If one drive group stops in a final position during synchro-
nous movement, the other drive group also stops.
Adjusting the travel speed
You can use parameter 111
the Hall sensor ratios and thus adjust the travel
speed of the second drive group for synchronous
movement.
Parameter 111 is only effective whilst drive groups
are being moved synchronously.
Moving drive groups in parallel
Fig. 83: Moving drive groups
Moving drive groups synchron-
ously
Fig. 84: Drive group management
activated
Fig. 85: Moving drive groups
Operating the hand switch with 6 function buttons
Control menu > Commissioning menu
20.08.2021
Control unit RK MultiControl II duo/RK MultiControl II quadro
189
Summary of Contents for RK MultiControl II duo
Page 115: ...Anhang Anhang 20 08 2021 Steuerung RK MultiControl II duo RK MultiControl II quadro 115...
Page 116: ...Anhang 20 08 2021 Steuerung RK MultiControl II duo RK MultiControl II quadro 116...
Page 228: ...Appendix Appendix 20 08 2021 Control unit RK MultiControl II duo RK MultiControl II quadro 228...
