RK Rose+Krieger RK MultiControl II duo, Assembly Instructions Manual

Page: 149 / 230

5 Assembly
5.1 Safety information for assembly
WARNING!
Risk of injury due to improper assembly!
Improper installation and assembly can lead to
severe injuries and substantial material damage.
– Before starting work, pull the mains plug and
ensure that there is sufficient space for
assembly.
– Handle exposed components with sharp edges
carefully.
– Ensure that the assembly site is kept clean and
tidy at all times! Components and tools lying
around or on top of one another are sources of
accidents.
– Assemble components properly. Adhere to the
required screw tightening torques.
5.2 Conditions at the installation site
The following conditions must be met at the installation site for the
control unit:
n Sufficient lighting is available.
n The installation site is clean and dry, and free from dust and
objects.
n The atmosphere must be free from solvents.
n All of the connections required on site are available.
n Room temperature: +5
-
+40 °C
n Relative humidity: 30
-
75%
n Air pressure: 700 hPa
-
1600 hPa
n Temperatures below the dew point are not permitted.
Improper assembly
Assembly
Conditions at the installation site
20.08.2021 Control unit RK MultiControl II duo/RK MultiControl II quadro 149