RK Rose+Krieger RK MultiControl II duo, Assembly Instructions Manual

Page: 143 / 230

3.5.3 Hand switch interface
-
MultiControl II duo/quadro
Pin Function Description Wire
colour
1 GND - Brown
2 RS485 B Control BUS Green
3 UP
n
Signal contact input
n Contact type: NO (high active)
n Voltage: maximum 12 VDC
White
4 12 VDC
n 12 V ± 10%
n Maximum 20 mA
Pink
5 RS485 A Control BUS Yellow
6 DOWN
n Signal contact input
n Contact type: NO (high active)
n Voltage: maximum 12 VDC
Grey
The signal contact inputs UP and DOWN can be switched by but-
tons (not switches) to position the drives to +12 VDC.
3.5.4 DATA interface
-
MultiControl II duo/quadro
Pin Function Description Wire
colour
1 GND - Brown
2 RS485 B Serial interface for communication
between the control units (sync
BUS)
Green
3 Sensor 2 No set function White
4 Sensor 1 Safety edge
Ä
Page 154 Grey
5 12 VDC n 12 V ± 10%
n Maximum 20 mA
Pink
6 RS485 A Sync BUS Yellow
7 Sensor 3 No set function Black
8 Sensor 4 External stop input Ä Page 157 Blue
Fig. 12: Hand switch contacts
Fig. 13: DATA interface contacts
Set-up and function
Connections > DATA interface
-
MultiControl II duo/quadro
20.08.2021 Control unit RK MultiControl II duo/RK MultiControl II quadro 143