7.5.2 “Stroke settings” menu
7.5.2.1
“Stroke unit/indicator” menu
The unit for the stroke indicator is set as a per-
centage.
The retracted position of the drives is 0%, the
extended position is 100%.
Prerequisite:
n
The main menu for the hand switch is displayed
1.
Select the menu via
“Control”
®
“Stroke settings”
®
“Stroke unit/indicator”
(Fig. 86).
2.
Set the new stroke height (Fig. 87) and unit (cm, mm, inches
or %).
ð
A new stroke height and unit have been set for the stroke
indicator.
7.5.2.2
“Change basic height” menu
A basic height can be used with the drives in a
completely retracted position, for example, to indi-
cate the work surface above the floor.
The basic height can only be changed if the unit is
set to cm, mm or inches in the “Stroke unit/
indicator” menu (
Selecting a menu
Fig. 86: Selecting a menu
Setting the stroke height and unit
Fig. 87: Entering a value
Operating the hand switch with 6 function buttons
Control menu > Stroke settings menu
20.08.2021
Control unit RK MultiControl II duo/RK MultiControl II quadro
190
Summary of Contents for RK MultiControl II duo
Page 115: ...Anhang Anhang 20 08 2021 Steuerung RK MultiControl II duo RK MultiControl II quadro 115...
Page 116: ...Anhang 20 08 2021 Steuerung RK MultiControl II duo RK MultiControl II quadro 116...
Page 228: ...Appendix Appendix 20 08 2021 Control unit RK MultiControl II duo RK MultiControl II quadro 228...
