Rizzoli L 90, Instructions Manual

Page: 99 / 148

ENGLISH
97
All the devices have a telescopic pullout for en-
dowed baking pan system. In this way, it is possi-
ble to extract the baking pan without the necessity
to sustain it, ensuring a better practicality. On the
cookers and thermal cookers the telescopic pull-
out is placed in a single position inside the oven
but this can be changed by moving it in the lowest
part or in the middle-upper and upper position. To
make this, see picture 29.
The baking-pan holder allows to extract the bak-
ing-pan in a safe way, with no need to use rags or
hot pads. The baking-pan holder must be hooked
to the baking-pan edge and used with two hands.
4.12 BAKING-PAN HOLDER
Picture 30 - Baking-pan holder.
For cookers and thermal cookers it is possible to
request a steel protection which could be placed
on the fire door. This protection is designed to
shield the door when the cooking operations re-
quire the continuous presence of the user in front
of the cooker or in presence of children. In the
other situations the use of the protection depends
on your discretion. The placing operations must
always be done with cold cooker opening the fire
door and placing the protection on the door by
joint.
4.13 FIRE DOOR PROTECTION (OPTIONAL)
Picture 31 – Fire door protection.
On every cooker and thermal cooker it is possible
to use a stainless steel plate cover, made to cover
the plate in the periods in which the cooker is not
used. In this way you obtain an uniform desktop.
The plate cover must be used with cold cooker or
thermal cooker. Before placing it, be sure that is
not present humidity, that the plate is clean and
that all the necessary maintenance is done.
4.14 PLATE COVER (OPTIONAL)