Rizzoli L 90, Instructions Manual

Page: 86 / 148

ENGLISH
84
L cookers and LT thermal cookers are endowed
with handrail on three sides (front, left side, right
side). In some situations it may be necessary to re-
move the handrail from one or more sides. To make
this operation, you need a star screwdriver and
the hex key with the screws given together with
the device. First, you must remove the final part,
which is just inserted by pressure. Then you have
to release the hex head screws under the carrying
of the handrail where necessary. Now you can ex-
tract the handrail bar from the carryings, then un-
thread the pommels of the carryings and the bend
of the handrail.
Now you must insert the final part where was in-
serted the bend before, then remove the carryings
with the star screwdriver, replace the fixing screws
with the screws given as endowment and finally
close again the hex head screws released before.
2.13 HANDRAIL PREDISPOSITION
Picture 15 - Modification of the handrail
Picture 16 - Modification of the handrail
2 mm
40 mm
30 mm
2 mm
40 mm
30 mm
2 mm
40 mm
30 mm